| To: | "Crouter, Bruce CIC" <bcrouter@cicorp.sk.ca> |
|---|---|
| Subject: | Re: Brake Failure |
| From: | Mitch Seff <ms6453@optonline.net> |
| Date: | Thu, 12 Oct 2006 11:56:45 -0400 |
Bruce, It sounds to me like the master cylinder is bad. If you have no fluid loss & no peddle the fluid is passing by the seals on the piston rod. This would account for the minimal breaking level which may only be some rear brakes. The seal may have torn or inverted on the shaft. In either case the rebuilder should cover the replacement if it is recent. -- Mitch Seff Oceanside, N.Y. 75 TR6 SC http://www.triumphowners.com/384 |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Testing - Please delete before reading, Steve, Stephen Hanselman |
|---|---|
| Next by Date: | Re: Differential rebuild, Mitch Seff |
| Previous by Thread: | Re: Brake Failure, N197TR4 |
| Next by Thread: | Testing - Please delete before reading, Steve, Stephen Hanselman |
| Indexes: | [Date] [Thread] [Top] [All Lists] |