Hi Listers,
I have been using Nelson Riedel's excellent guide (Buckeye
Site) for repairing and tuning the Strombergs on my 1970 TR6. All
has gone well until today, when I started the car in preparation for
tuning, gas was flowing out from the float chamber vent port on the
rear carb. I had installed new floats and drain hole plug ... prior
to this the rear carb seemed to be the one working the best.
In Part II of the guide it has instructions for adjusting the
vent lever ... I can find no such lever on my carb ... they are
labeled as 175 CD-2s ... and are supposedly the " correct" ones for
the 1970 TR6
Any help would be greatly appreciated.
Thanks for your time
--
Bill Pugh
1957 TR3 TS16765L
aka
Casper
1970 TR6 CC59179L
aka
Rosey
Wallace, CA
|