Mike,
It doesn't have the holes for the studs in the bottom
of the sump? There were actually 2 places it could've
been mounted...in the back(parallel to the floor) & in
the bottom. The back holes allowed for a Spitfire/GT6
installation & the bottom for a TR install. Although
they can be interchanged with a little adaptation.
Check it out
Todd Bermudez
CD198L
CF25768UO
--- DaCRANEz@aol.com wrote:
> I bought a tranny with a J type o/d off eBay. I
> discovered that it is a
> Volvo conversion. It does not have the bolt holes
> for the mount in the back of the
> rear housing. It looks like a straight-forward
> process to remove the rear
> housing so that I can drill and tap the necessary
> holes. Any tips or warnings
> would be appreciated before I screw something up. As
> if that's ever happened. Got
> all the parts- just want to git er done.
> TIA
> Mike C
Tired of spam? Yahoo! Mail has the best spam protection around
|