snip
,Friends:
<
< I thought I'd share this experience I had trying to
reinstall <my
<windshield. I had the rope in place in the rubber
gasket and <lubed it with
<liquid dish detergent.
Jim & All,
I had the experience of putting a windshield in my car
this fall. With the help, patience & calm of fellow
lister, Ron Landis the glass went in after 3 - 4
attempts. Key learning's from this was.
1. Use a 16 - 14 ga. electrical wire. Rope, strong
twine, etc. doesn't cut it...actually the frame cuts
it and it takes a lot of force to pull.
2. Use LOTS of soap/water solution in the frame anf on
the seal.
3. Follow the Bently instructions.
4. Have a friend that will not let you give up. Then
reward him w/a local micro brew or a fine single malt.
Of course this all is moot now but you gave it a try.
Cheers
Patrick Bloem
68 TR250
CD 5841 LO
|