tr6970---Get rid of the play in the pedal box, and the clutch release
point will come up off the floor.
The secondary arm where the clevis pin is atttached tends to wear to an
oval shape. This can be repaired by welding up the hole and boring it
out to the original size (.312) OR drilll this worn hole out to a larger
diameter and sleeve it back to original, maintaining the stock clevis
pin and pushrod attachment diameter.
Play farther down towards the clutch itself will be automatically taken
up by the hydraulics of the system. These worn parts, if any, can be
later dealt with.
Dick
|