As I remember, the brass trunnions screw off the mating piece with a LH
thread on one side and a RH thread on the other, so yes they are certainly
threaded. Find a copy of Bentley.
Jerry
-------------------------------------------
Date: Sat, 23 Apr 2005 14:54:44 -0400
From: "John North" <jnorth@novagate.com>
Subject: Removing Trunnions
Is there a trick to removing these? I have the pin and nut off and the
pressure off with a jack under the spring plate, but the bolt is really
stuck. I can hardly turn it with a socket and a 24" bar, let alone back it
out. Is it threaded in the lower a-arm? Can I put the nut on it and
whack it with a BFH? It is not binding in the vertical link, because I can
move that back and forth at least a half inch (and which is why I have to
get this thing out.).
Any help appreciated.
John North
76 TR6
------------------------------
|