damn, i was about to tell you the spring goes outside the door panel
when i consulted my trf catalog and found i've done it wrong! it clearly
says the spring goes "behind door panels".
the order you've listed is correct. it's real easy, kinda like the
bushings
on the accelerator pedal rod :^) have fun!
Tom Di Iulio
1976 TR6 (with door crank springs in wrong)
Denver, Co
----- Original Message -----
From: "Alan & Debbie Lindner" <theedge@cts.com>
To: <6pack@autox.team.net>
Sent: Friday, February 07, 2003 3:15 PM
Subject: window crank
> I want to be sure that I am doing this correct.
>
> To install the window crank,
> 1. Put the spring under the door panel.
> 2. put the plastic washer on the outside of the door panel.
> 3. Push the crank on the shaft.
> 4. Try to put the pin into the crank and shaft hole.
>
>
> =========================
> Alan Lindner
> '72 TR6 French Blue
> CC75676L
> San Diego, CA
|