6pack
[Top] [All Lists]

[Fwd: Gunst Clutch kit]

To: 6-Pack <6pack@autox.team.net>
Subject: [Fwd: Gunst Clutch kit]
From: Don Malling <dmallin@attglobal.net>
Date: Mon, 13 Jan 2003 21:11:00 -0500
Duuuhhhhh....

Monday 01/20/03 is the day not 03/20/03

Don Malling
Received: from 42dbca82.dsl.aros.net ([66.219.202.130]) by prserv.net
  (in2) with ESMTP id <2003011401411010202nvskhe>; Tue, 14 Jan 2003
  01:41:10 +0000
Received: (from majordom@localhost) by 42dbca82.dsl.aros.net
  (8.12.5/8.12.5) id h0E1icFq000456 for 6pack-qwerty; Mon, 13 Jan 2003
  18:44:38 -0700
Message-ID: <3E236A58.66B18A8B@attglobal.net>
Date: Mon, 13 Jan 2003 20:39:36 -0500
From: Don Malling <dmallin@attglobal.net>
X-Mailer: Mozilla 4.73 [en] (Windows NT 5.0; U)
X-Accept-Language: en
MIME-Version: 1.0
To: 6-Pack <6pack@autox.team.net>
CC: "RPVanLuchene@lbl.gov" <RPVanLuchene@lbl.gov>, "gunst@t-online.de"
  <gunst@t-online.de>
Subject: Gunst Clutch kit
X-Converted-To-Plain-Text: from multipart/mixed by demime 0.99d.1
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: owner-6pack@autox.team.net
Precedence: bulk
Reply-To: Don Malling <dmallin@attglobal.net>
X-Mozilla-Status2: 00000000

List,

Ryan VanLuchene and I have compiled a list of 21 clutch bearings. Some
folks wanted more than one.

I e-mailed Joachim Gunst about shipping and availability of 21 bearings.
He has the bearings available, but is having trouble sourcing the two
3/8" dowels that serve to align the gearbox with the flywheel and
clutch. If you read Nelson Riedel's write-up of the Gunst bearing at
http://www.buckeyetriumphs.org/technical/Clutch/ReliableClutch/ReliableClutch.htm
you will see that Nelson believes that 3/8" bolts will work just as
well. In the attached note from Gunst, he says that these dowels should
be 3/8" in diameter and 7/8" in length. He says that Nelson told him
they could be easily purchased in any hardware store, which I'm sure
they can. Just thought I should point that out. My guess is that some or
all the kits will come w/o the dowels.

I would like to wrap this up by Monday 03/20/03 and get the order in.

At 21 bearings we are just over the next weight plateau which was 20
bearings. For 21 bearings it will be about $2.85 for ground and $6.23
for air (each). I have heard that ground can take 5 weeks. FWIW, 33
bearings would cost $1.81 ground and $3.96 air (each). If we go over 33
bearings, we get to play this game again :-). These shipping costs are
in EUR which are very close to dollars 1 EUR = $1.04.

I won't need my bearing for months, but my vote is for air. There will
also be some shipping charge from me to you. I hope $5.00 or less --
whatever it costs by USPS. I will make no money from it.

I will want full payment before I ship them to you. I had planned to put
them on my Visa, but I didn't expect 21 bearings. I may ask for partial
payment before I order -- not sure about that. I'll ask Nelson how he
did it. I'm planning on some heavy duty parts ordering for my TR250, so
I may have to watch my Visa level. 

So, Monday 03/20/03 is the day.

Don Malling 
&
Ryan VanLuchene
Received: from mailout06.sul.t-online.com ([194.25.134.19]) by
  prserv.net (in3) with ESMTP id <20030112181533103085pkm4e>; Sun, 12
  Jan 2003 18:15:34 +0000
Received: from fwd04.sul.t-online.de  by mailout06.sul.t-online.com with
  smtp  id 18Xmdv-0004j9-03; Sun, 12 Jan 2003 19:15:31 +0100
Received: from J3Z6I0 (06221840393-0001@[62.157.4.109]) by
  fwd04.sul.t-online.com with smtp id 18Xmdm-0Aaen2C; Sun, 12 Jan 2003
  19:15:22 +0100
Message-ID: <005701c2ba66$a4bee680$fe79a8c0@J3Z6I0>
From: Gunst@t-online.de (Joachim Gunst)
To: "Don Malling" <dmallin@attglobal.net>
References: <3E1F9405.8D19C5BC@attglobal.net>
Subject: Re: Clutch Bearings
Date: Sun, 12 Jan 2003 17:57:06 +0100
MIME-Version: 1.0
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2600.0000
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
X-Sender: 06221840393-0001@t-dialin.net
X-Mozilla-Status2: 00000000

Hallo Don, hallo Ryan
it's a real pleasure to read your message. It seems to be time for me to
find a distributer for the north american market. Nelson already gave me
some hints but I  did't care yet. My shop left a little time only.
First your question from last email: I have problems at the moment to get
the dowels. I talked about that to Nelson and he said it is not a problem to
get those dowels in any hardware shop for a few cents. They have to have a
3/8" diameter and length should be about 7/8".
Right now I have still enough bearing units in stock.
Here now the shipping cost.

Ground/Air (EUR):   > up to 6 bearings 28,00/43,00 (4,66/7,16 each)  >up to
13.....36,00/65,00 (2,76/5.00each)  >up to 20..... 44,00/87,00 (2,20/4,35
each)  >up to 33..... 60,00/131,00 (1,82/3,96 each)

Kind regards
Joachim


>
> Hi Joachim,
>
> We have requests for 21 bearings so far. There may be more coming.
>
> You estimated shipping cost for up to 13 bearings for us. We are now
> over that number. Can you give me an estimate for the number of bearings
> in the next level of shipping costs? At least 21 bearings and maybe up
> to 30.
>
> I never thought this would happen :-)
>
> Do you have enough bearings?
>
> Are the shipping costs air or ground? If the shipping costs you gave me
> are for ground, can you give me  both air and ground costs and the
> shipping time for each?
>
>
> Thanks,
>
>
> Don Malling &
> Ryan VanLuchene

<Prev in Thread] Current Thread [Next in Thread>
  • [Fwd: Gunst Clutch kit], Don Malling <=