Re: Autozone Distributors/Distributor Rebuilds

[Greg Perry <rgp@ghg.net>]

I rebuilt my distributor.  The problem was that the
shaft is worn were the top and bottom bushings are.  Even if you replace
the bushings there is still a slight wobble, but not as much as there
was before!  I took it to a machine shop and had the bushings made and
installed $20.00.  The car ran very well after that.  I also replaced
the inside wire to the plate.  More than likely you will end up with a 
different distributor model # when you purchase a rebuilt one!

Greg Perry

72 TR6