Hey Vito;
Why not see if any of the Big 3 may be willing to take them ALL off your hands?
Dave Friedlander
CF25194UO
================================================
Vito Pacione wrote:
> I don't know if any resellers (or anyone else for that matter) has any
> interest, but I had some evaporative tubing made up for my restoration because
> I could not find an exact duplicate outer diameter and wall thickness (I had
> no idea how much suction there was in the system and was unsure about using a
> thinner tube). I had to buy quite a few of these and have just been holding
> onto them.
>
> This is the 58" long black plastic tubing that goes from the front of the car
> and wraps around the front crossmember and mates to the metal tube. Part
> number #216009.
>
> I am now trying to get rid some stuff so I can let go of my storage space. If
> anyone is interested I put a bunch of them on ebay. I still have lots left in
> case anyone is interested, but I really don't know of a cheap way to mail them
> because they won't wrap into a very small diameter and tend to take a little
> bit of a set when wrapped (probably not too much of a problem, but still...).
> Any sort of long tube costs alot of money so the shipping containers are going
> to cost way more then what's inside unless people buy them in bulk. Anyway,
> hopefully I can get rid of some of these things and get some room back.
>
> I also have some of the foam pads that go behind the gas tank that I had made
> up. There is a short and long pad that's required (I had both made up). I have
> boxes that will fit these. i have not had a chance to put these up on eBay
> yet.
>
> Thanks!
|