Darcy
This is just my thoughts on this problem. You
stated that you are using silicone plug wires
with the high energy coil. Do these wires have a
copper or metal core? If not you my want to go
to a set. First though if you have access to a
good quality meter check to see whether you have
continuity and what the resistance is in the
wires you have. If there is a wide variance then
you found your problem.
Dale
--- DarcyHunt@aol.com wrote:
> Need help. After having my HS6's rebuilt by
> Joe Curto this winter, I started
> off the season by adding Silicon plug wires,
> new plugs and a high energy
> coil. Using the Color Tune it was running
> great! BAG needles seemed just
> perfect and she would pull strong up through
> 5000 rpm.....then the missfiring
> started again. Resolved it be changing 1 plug
> which last about 20 miles now
> it appears that several more plugs have stopped
> firing or are firing
> sporatically. I'm going to get a new set
> tomorrow but I'm dying to go on the
> Newport, RI rally on Sunday. Any help would be
> appreciated. I already went
> to the Pertronix ignition last fall to try and
> address this same problem.
>
> Darcy hunter
> '73 TR6
> North Easton, MA
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com
|