Re: Weber DGV Carb Conversion

[william mcintire <william.mcintire@wright.edu>]

I believe the canister connections on the
strombergs are subject to manifold vacuum. This
tends to suck the vapors from the canister. If you
just run the lines to the air cleaners, I doubt
there will be sufficient vacuum to vent the
canister. The valve cover vent could be run to the
air cleaners. The vent tube should be put on the
carb. air inlet side on the cleaners so as to not
goo them up.

Hops this helps some
Bill    '70 6