Cliff, a description of how to replace those seals is at
http://www.buckeyetriumphs.org/technical/
Scroll down & click on TR250-TR6 Gearbox - Cover Overhaul.
Job is a couple hours, most spent finding the tools. A little longer if
pressed-in plunger retaining plugs are used.
Nelson Riedel
Granville Ohio
'68TR250, '70TR6, '76TR6
----- Original Message -----
From: "Cliff Davies" <cdavies@holzher.com>
To: <6pack-digest@autox.team.net>
Sent: Sunday, December 30, 2001 8:42 AM
Subject: Leaking shifter rod seals
| While in the process of removing my transmission tunnel
| I noticed alot of oil on the inside of the tunnel and
| on the base of the transmission. From further inspection
| it seems the oil is coming from the point where the shifter
| rods enter the tranny(non OD). There are 3 seals on these rods according
| to various parts books and I suspect they are shot. Are these easy to
| change? any special tools? I am in the process of lifting the body off and
| had no plans for tranny work.
| Thanks
| Cliff
| 73 TR6
|