-
> From: Timothy J. Boesken [mailto:tboesken@one.net]
> Sent: Monday, December 10, 2001 6:28 AM
>
> I'm removing the headlight wells on my '73 Six in
> preparation for a new paint job. I don't see a way to
> disconnect the light sockets short of cutting the
> wiring. Am I missing something?
Let's see if I can remember this...
- Remove the headlight and bulb (sounds like you've already done that)
- Disconnect the headlight wires inside the engine compartment (look for the
blue/white, blue/red & black wires coming into the engine compartment via
the grommets in front of the wheel well, they will likely be encased in a
piece of black plastic tubing)
- Drill out the three (large) rivets holding the headlight bucket to the
body
- Pull out the bucket, pulling the wires through the grommet to free the
assembly from the car
HTH
Peter Zaborski CF58310UO
|