Sixters
For what it's worth, when you try to slide the new seat covers over the foam
back, you'll automatically learn a bunch of new words. A street rod guy
showed me a great trick, and it works to perfection.
Slide a lawn/garden plastic trash bag over the seat foam, from the bottom
up. Then the new seatcover will almost fall into place. You can then reach
under and pull out the trash bag.
Paul
'72 6
----- Original Message -----
From: James A. Tabor <jatabor@hotmail.com>
To: <6pack@autox.team.net>
Sent: Thursday, November 29, 2001 9:24 AM
Subject: Re: TR6 Interior
> Scott,
>
> I did a complete interior replacement, ahhhhh.
> my advice.....
> keep the 'rubber bands' used on the back of the seats.
> they are UNAVAILABLE.
> personally, i like to keep all clips that are in usable shape.
> these include door panel clips, and the clips for the seat covers.
> also, all the screws used to hold the
> panels with the nice little cup shaped washers. i would keep the
> carpet to assist in the snap alignment. make sense? the snaps that
> hold the carpet to the floor boards.
>
> what else...hmmmm....
>
> well, basically i keep EVERYTHING until the parts are replaced.
> just my (insane?) way of doing every task/repair. you never (never)
> know what you will need. otherwise you will end up beating yourself later
> and fantizing about doing a junk yard recovering operation! ;-)
>
> -james
> '76 TR6
> MD
>
> >From: slarch@nisource.com
> >Reply-To: slarch@nisource.com
> >To: 6pack@autox.team.net
> >Subject: TR6 Interior
> >Date: Thu, 29 Nov 2001 07:35:08 -0500
> >
> >List,
> >
> >I am in the process of a frame off on my TR6 before trashing the
> >deteriorated interior I was wondering if there was anything I need to
keep.
> >Do the new kits include all of the cardboard backing, clips, screws, etc
I
> >need for the carpeting and upholstery replacement?
> >
> >Thanks in advance,
> >Scott
> >76 TR6
>
>
> _________________________________________________________________
|