John
Did not see where any one included the three bolts on the
inside of the A pillar. You need to take off the interior
kick panelto get at these three bolts.
Dale
--- John Zimmerman <JohnZimmerman@vandorndemag.com> wrote:
> I've tried half heartedly to remove the front fenders
> (wings) in the past without too much success. When I get
> all the bolts out along the top of the fender and inside
> the door there is absolutely no movement in the fender at
> all. It looks as though the PO installed the aftermarket
> fiberglass wheel well liners (there is a row of rivets
> along the top of both wheel wells in the engine
> compertment) and there is a fair amount of undercoating
> in the wheel well itself. Am I missing some bolts or
> something else? I would think that there would be a
> little bit of play with all the bolts removed. Any ideas
> or thoughts?
>
> Thanks in advance,
> John Z
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
|