Daewoo at IAA

No. 1 - front view No. 1 - rear view No. 1 - at the IAA show

So here's the

No. 1

. It's based on next-generation Nexia (not on the current Opel Astra derived) which'll be out late 1996, so this 2-seater will be on the market from 1997. It's a Mazda MX-5 copycat. It was created by the European Daewoo Design Centre (I think this is the reason behind the name: the first European designed Daewoo).

No. 2

With the concept car Daewoo No. 2 created a min-van. The two individual seats for passengers sitting in the rear are fitted in a raised position, thereby providing passengers not only with an unimpeded field of vision but also with a better protection in case of side impacts.
In the Daewoo No. 2 an in-line 6-cylinder engine is installed. Furthermore, the construction allows other types of drivetrains as well.
The aluminium blcok was developed especially for front-driven vehicles and it's a part of a forthcoming range which encompasses 3 to 6-cylinder with displacements from 0.8 to 2.5 litres.

Go back to the IAA report!

Paul Negyesi

Budapest, Hungary.
This document or its parts can not be reproduced, quoted in any means.