In a message dated 3/20/02 6:25:50 AM Eastern Standard Time,
hamilton@nfdc.net writes:
> Jack,
> Can I go from the screw post on the alternator directly to the battery
> cable that supplys thestarter?
>
> Once I find the exciter pin, can I connect that directly to the hot side of
> the ignition switch or do I need a separate switch just for that circuit
>
> The alternator I am using, a tiny Nissan, has the three pins marked: IGN,
> L, S. Does that help to identify the exciter pin?
>
> Thanks again,
> John
>
Lets see if one of these "experts" knows the answer, John. Yes, the big post
should go to the started solenoid. I thought the IGN was the exciter pin and
that would be all you needed. It may be a good idea to have a bleed-off
circuit like they are saying, but I have never used one.
jw
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/vintage-race
|