I happen to have a scanned copy of a 6 terminal cutoff switch designed for
use with an alternator. Here's a link to the stock instructions:
http://www.tonydrews.com/Kill_Switch2.jpg and here's my modification of
that to avoid running extra wires through that switch in a particular
installation: http://www.tonydrews.com/Kill_Switch3.jpg . These are pretty
large pictures and IE 6.0 seems to shrink them and make the little lines
difficult to see. When you turn off the switch, it opens the top and
bottom contact sets but closes the middle contact set to allow the
alternator to bleed off the voltage through a resistor.
- Tony Drews
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/vintage-race
|
