vintage-race
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Re: Race Prep; Offset rocker arms

from [Roger Garnett] [Permanent Link][Original]
To: vintage-race@autox.team.net
Subject: Re: Re: Race Prep; Offset rocker arms
From: "Roger Garnett" <rwg1@cornell.edu>
Date: Wed, 31 May 1995 21:48:18 -500 
> I hope the oil feed hole to the rockers still lines up fully!

Ah- lastly, I re-counter sunk the oil feed hole on the bottom, a bit oversize 
to make up for the offset to insure proper oil feed.

RG
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Race Prep; Offset rocker arms, Roger Garnett
Previous by Thread:  Re: Race Prep; Offset rocker arms, Roger Garnett
Indexes:  [Date] [Thread] [Top] [All Lists]