triumphs
[Top] [All Lists]

[Fot] Coated Bearing source

Subject: [Fot] Coated Bearing source
From: steve at artwithcars.com (Steven Belfer)
Date: Fri, 19 Jan 2018 10:49:22 -0800
References: <2AF98E8F-BA98-446E-831A-0BAB0D274191@me.com> <7193aaef-d703-4258-c321-3666804e3dff@tonydrews.com>
I also buy the king tri-metal bearings from the usual suppliers and send them 
to Calico Coatings.  

On my latest engine build, the rod bearing clearance was too large.  Calico was 
able to spray the coating an extra 1/2 a thousandth per shell which reduced my 
bearing clearance to the proper amount.

~STEVE




On Jan 18, 2018, at 7:03 PM, Tony Drews via Fot <fot at autox.team.net> wrote:

I buy my TR-4 tri-metal bearings from BP Northwest and then send them to Calico 
Coatings for that part.  Not exactly what you're looking for, but Calico 
Coatings is who I've used for over 10 years and am very happy with.  Just be 
sure to mail them them Denver North Carolina - I once sent to Denver Colorado 
instead.  That was a delay of game.

https://www.calicocoatings.com/ <https://www.calicocoatings.com/>
Tony Drews

On 1/18/2018 10:47 AM, Scott Janzen via Fot wrote:
> anyone aware of a source for high quality tri-metal engine bearings for the 
> GT6/TR6, preferably already coated, so that I don?t need to subsequently send 
> them out?
> 
> Also, recommendations on coatings/vendors who do same?
> 
> thanks,
> Scott
> 
> 
> _______________________________________________
> 
> http://www.fot-racing.com <http://www.fot-racing.com/>
> 
> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
> Archive: http://www.team.net/archive <http://www.team.net/archive>
> Forums: http://www.team.net/forums <http://www.team.net/forums>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony at 
> tonydrews.com <http://autox.team.net/mailman/options/fot/tony at 
> tonydrews.com>
> 
> 

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive



-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180119/8dbcb75e/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>