Bill,
You can but life is so much easier if you remove it. Just a couple of bolts
and you have gained another 8-10 inches of clearance.
My tip: Have the car up on secure jack stands so you can get the maximum
tilt on your way out/in to minimize scraping on the firewall and throttle
rod(if not removed).
Enjoy,
Bill
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of William Brewer
Sent: Tuesday, November 19, 2013 7:55 AM
To: Triumphs
Subject: [TR] Pulling TR3 engine/trans
Just curious. Do you have to pull the stick shift off of the TR3 trans
when pulling out the TR3 trans/engine combo? Or can you get it out with the
stick still on? I'll pull the stick off, but I was wondering...
Bill in
Tehachapi
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|