triumphs
[Top] [All Lists]

Re: [TR] TR3 Clutch not releasing

To: allenhess@mgcarclub.com, triumphs@autox.team.net
Subject: Re: [TR] TR3 Clutch not releasing
From: thenicholls@verizon.net
Date: Wed, 30 Oct 2013 16:32:31 -0500 (CDT)
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
Same thing happened on my TR6, and indeed, the fork was broken.


New clutch, rebuild gearbox, $4000 later, the car is happy and I am sad.


Craig 
72 Tr6
 
 
 
On 10/30/13, Allen Hess<allenhess@mgcarclub.com> wrote:
 
Try pumping the clutch two or three times in quick succession. If it 
then works or almost does, I'd suspect a broken fork pin. I stuck disc 
would not change the pedal feel. (I drove home once with that 
"technique".)

Allen
On Oct 30, 2013, at 2:00 PM, triumphs-request@autox.team.net wrote:

> Drove and parked the TR3A two weeks ago, fun drive, no problems or 
> unusual
> sounds. Got in yesterday and the clutch will not release.
>
> Pedal feels about 10% softer than usual, slave cylinder is operating 
> the
> release arm but no disengagement. New Disk/PPplate/TO bearing just 
> 6 months
> ago, all have performed as expected until today.

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>