Re: [TR] TR3A rear spring "fulcrum" bolt

["Randall" <TR3driver@ca.rr.com>]

Worth noting, perhaps, that the head of the pin is tapped for a puller.  I
used a bottoming tap to clean out the tapped hole, then some hardened
threaded rod, nuts & 'setup' washers from MMC plus sockets and a bit of pipe
to form a makeshift puller.

Worked for me, on two different cars now.  I also soaked the area in PB
Blaster for several weeks, and beat on things from time to time to help the
PBB penetrate.

-- Randall  

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net