triumphs
[Top] [All Lists]

[TR] TR3 Heater leak test

Subject: [TR] TR3 Heater leak test
From: wbeech at flash.net (wbeech at flash.net)
Date: Sun, 29 Apr 2012 14:26:11 -0500
References: <!&!AAAAAAAAAAAYAAAAAAAAAAAokWe7nBZPoA+vt51ClezCgAAAEAAAALQFH73RyxdLtM91lmPo4q4BAAAAAA==@verizon.net>
Yes, pressure from your garden hose would be too much, probably around
40-50psi.  Just running water through it would not hurt it, but may not find
a small leak either.  

You could fill it an let it stand overnight and see if there is any seepage,
or take it to a local radiator shop and let them test it at a low pressure,
remember you cap is only a 4psi rating.

Bill 

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Carl TR
Sent: Sunday, April 29, 2012 11:56 AM
To: triumphs at autox.team.net
Subject: [TR] TR3 Heater leak test

I need to test the heater core before I install it.   Any do's don'ts?   Is
there any issue with hooking up a hose to both sides and let water flow
through?  I would think that it shouldn't be 'closed' at the other end
because I believe the pressure would be too high.

Thanks
Carl


1961 Triumph TR3A - TS81802LO
http://mysite.verizon.net/cfmtr3a/
Still being restored - but 2012 looks like the year..

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net

<Prev in Thread] Current Thread [Next in Thread>