If you powder coat - at least test fit all gauges and switches before
putting the panel on the dash fascia. I had to sand down the pc a little on
several of the openings because of tight fit. Much easier to do off the
fascia....
C
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Bob Labuz
Sent: Friday, April 13, 2012 8:08 AM
To: Andrew Uprichard
Cc: 'Triumphs'
Subject: Re: [TR] wrinkle paint or cover?
Andrew,
It should be wrinkle paint. I would have it powder coated if possible.
Bob
On 04/13/2012 07:48 AM, Andrew Uprichard wrote:
> I am restoring a smallmouth TR3 TS19652. Should the gauge cluster
> panel be covered or painted in wrinkle paint?
>
> Andrew Uprichard
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/yellowtr at adelphia.net
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/cfmtr3a at verizon.net
|