triumphs
[Top] [All Lists]

[TR] TR6 Rear End Clunk

Subject: [TR] TR6 Rear End Clunk
From: anabil007 at comcast.net (Bill)
Date: Mon, 23 May 2011 16:42:27 -0700
References: <mailman.5.1306173602.27879.triumphs@autox.team.net> <C490F62A-1AD2-41DF-B710-1B9B17D8CC32@execulink.com>
Probably worn splines or u-joints on the half-shafts ... fought this 
for some time finally put in the GoodParts   CV half-shafts ... 
problem solved.

You should also plan to reinforce the mount ... good kit for that 
available (if you can weld)

>A little help from TR6 owners please. I have a TR3 and a TR4 but 
>lately have been looking to purchase a TR6. I recently looked at one 
>quite a distance from where I live but have a concern about a clunk 
>in the rear. When both I and the owner drove it, there was a mild 
>clunk coming from the rear when engaging the clutch from a 
>standstill and when I drove it, sometimes when shifting gears just 
>before engaging the next gear. It seemed similar to what I have 
>experienced when one of my cars needed a new universal joint. The 
>owner indicated that he understood from other TR6 owners that 
>"...that was the way TR6s were". He tells me the universal joints 
>and the differential mounts were replaced . From what I have read, 
>this might relate to worn diff mounts that lead to cracks in the 
>frame where they mount. Since the diff mounts were replaced, it 
>shouldn't be worn diff joints. What is the wisdom of the list 
>relative to this rear-end clunk?
>
>Keith R. Stewart
>75 Camden Road
>London, Ontario
>N5X 2K2
>Home: (519) 660-1916
>E-Mail: keithstewart at execulink.com


-- 
"Thinking is the hardest work there is. That's why so few people 
undertake it." - Henry Ford
Bill Pugh
1957 TR3
"Casper"
TS16765L
Wallace, CA

<Prev in Thread] Current Thread [Next in Thread>