Gary,
After tiring of the uncomfortable, smelly condititon of my seats, I gave some
thought to doing them in a manner that does not require financing.
While sitting in the doctors office in one of those chairs with a metal frame,
form shaped seat with closed cell foam and fabric covered, I had a Eureka
moment.
I made a frame out of 3/4 ply and then bent 1/4 ply to form the dish shape that
slopes front to back according to the height, shape, and slope of the original
seat. I then covered with 1" closed cell foam from Goodyear, 2" open cell
upholstery foam, then about 1" cotton batting. You need to take all this into
account when making the frame or it will be too high
Sent via BlackBerry by AT&T
-----Original Message-----
From: Gary Nafziger <nafzigerg@yahoo.com>
Sender: triumphs-bounces@autox.team.net
Date: Tue, 21 Sep 2010 20:32:53
To: <triumphs@autox.team.net>
Subject: [TR] tr-3 seats
Listers,
Thinking ahead to re-building the seats on my tr-3 using vinyl from one of the
big 3 vendors. I'll be using something other than the new springs available
but
am wondering about the padding kit. Can a person purchase the same material at
a local fabric shop? Or possibly simply use foam? Has anyone re-built they're
own seats with materials other than the hessian?
gary n.
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/dlylis@gmail.com
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|