Sam
It is a tight fit for sure so if they supplied the wrong filter that could be
your problem. You definitely have to go in from the bottom underneath the
steering rod. You might have problems with the brass brake junction or bolt
attached to the frame. Just drained the oil and filter this weekend so I know
it will fit
Good luck
Tom
-----Original Message-----
From: TRDOCTOR@aol.com
To: triumphs@autox.team.net; rimmerbros.com@aol.com
Cc: tr6@atlasok.com
Sent: Fri, Aug 20, 2010 3:21 pm
Subject: [TR] GT6 Oil Filter Adapter
Worked this morning trying to fit the spin on oil filter adapter from
immer on my LHD GT6. After removing the side cover under the hood I was able
o extract the canister and fit the adapter. Problem is there is no way to
et the oil filter in there unless I remove the relief valve and then
here is no guarantee that I will be able to get it back in. I am using the
ilter supplied and can't find a shorter one. Any suggestions? If I have to
isassemble stuff every time I change the filter I'll just put the canister
ack on and send this one back.
am Clark
reen Country Triumphs
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|