As was installing my starter in my 73 TR6, I connected the heavy battery cable
to the heax nut on the solenoid.
And I connected a thin wire (1/4" spade connection) on the solenoid. I assume
this is from the ignition?
I noticed another wire that was wrapped in the harness along with the thin
spade connection wire I just connected.
This wire was broken off from something (bare wire).
Does anyone know where this wire connects to?
My starter has one male spade connector and the heavy hex nut connection for
the battery.
Wayne
73 TR6
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|