I also put the cam back in the distributor with the rotor slot 180
degrees out. It only took a couple of minutes to pull the breaker plate
and flip it around the other way.
Mike
Allen Hess wrote:
> If you took the cam off the dist. shaft, I think you can put it on 180
> degrees off. (I think I did it once)
>
> Allen
>>
>> Anyway, found that the distributor dropped onto the oil pump shaft slot
>> in only one orientation. Looks like it should be able to mate up if it
>> is rotated 180 however it does not.
>>
>> The reason I ask is I appear to be 180 out when on TDC of the
>> compression stroke.
>>
>> I did disassemble the distributor to look at and lubricate the innards
>> and am wondering if I put something back together 180 out.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|