had a similar proplem on a TR4. It was a bad flex line. The inner lining was
colasping and not letting the fluid return fully. Every time you used it it
built up a little more pressure. Cracking the bleed valve would release the
pressure and start the cycle all over again.
Edward Hamer
Petaluma CA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|