Bill,
I have a 57 TR3 and and a 61 TR3A. Both are welded flush with the
surface of the apron. The TR3A was severely rear ended at some point so
it may not be a good reference, but the TR3 rear apron was relatively
unmolested.
Thanks,
Mike
Bill Beecher wrote:
> Starting to put the repaired body back together in prep for the final coats
> of paint and I am just now coming to the realization that the long
> tubes/bushings that the rear bumperette bracket bolts go through are
> probably permanently attached to the rear apron. Of course, when I took the
> car apart these came loose freely as I disassembled everything.
>
> So, If I need to go back and weld these in place, can someone tell me how
> much of the tube should protrude past the sheet metal of the rear apron...
> Or should it be flush?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|