I am sure someone out there has the link, but there is a guy who hinged his
front apron for easy access to his engine compartment.
I always wondered if anyone ever engineered a kit for this purpose?
Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Geo Hahn
Sent: Thursday, January 29, 2009 5:32 PM
To: Ed Oot
Cc: triumphs@autox.team.net
Subject: Re: [TR] It might be possible, but....
Ed -- I am curious what aspect finally defested you. I haven't had to try
this but would really dread pulling the apron off of mine as over the years
so much has probably been tweaked, painted and goodness knows what to get
the sheet metal to look right.
Geo
On 1/29/09, Ed Oot <eoot@citlink.net> wrote:
> After researching all the advice on removal of the TR3 steering box
> without removing the apron, I gave it a shot. After 10 hours of
> frustration in the attempt, I finally gave up...
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as wbeech@flash.net
http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.233 / Virus Database: 270.10.15/1922 - Release Date: 01/28/09
19:24:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|