Right. I think the idea is that it gets pushed out of the way where
metal-to-metal contact occurs but fills in the various voids to
prevent moisture and corrosion.
Geo
On 10/6/08, pethier@comcast.net <pethier@comcast.net> wrote:
> -------------- Original message ----------------------
> From: DLylis@aol.com
>> dielectric grease conducts
>
> It's not supposed to.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|