This site is a pretty complete fuel gauge tutorial:
http://mgaguru.com/mgtech/electric/fg_01.htm
Includes testing the gauge. I followed the basic idea but did not build the
test unit, just grabbed a handful of suitable resistors and some jumper
wires to simulate full, half, empty, etc.
Geo
----- Original Message -----
From: <terryrs@comcast.net>
> I suspect the guage, but to rule out the sending unit, would it work to
> hook a variable pot to the fuel guage in place of the sending unit, then
> slowly adjust the pot to look for movement of the needle?
> Maybe I'm overthinking and there's an easier way....
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|