Hi Paul,
Not sure. I am even not sure of the exact displacement. However, I do know
that it has the 87mm pistons. The PO told me so. :o)
Alex
----- Original Message -----
From: dorpaul
To: ambritts@bellsouth.net
Sent: Wednesday, April 16, 2008 11:21 PM
Subject: sputtering TR3
Alex, I forgot if you mentioned the displacement with your '59 TR3. But,
I've heard from some reliable sources that if one increases to 2038 cc's that
a change in models of distributor is also needed. Because of a different
curve.
Since I don't remember reading about this... I don't know if it's public
knowledge. Do you beleve this?
Thanks,
Paul Dorsey
I think the dizzy model required is 40795
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|