Just as another point of reference. When I purchased my camshaft from
Intergral camshaft design , he asked for my followers to Rockwell test &
dress to the cam. If I remember correctly I sent him more than needed & some
failed. I think it's a good idea to have the machine shop prepare them for
the cam.
I did the standard break-in on a fresh motor, used conventional motor oil
for the first 2,000 miles & then used Mobil 1 since. Four years later and
plenty of miles all is good.
Mitch Seff
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|