I am at the point to install the front apron of my TR3A restoration but
wanted to check with those who have BTDT. It has the split column and the
lower end is installed. Do I/should I install the rest of the steering,
especially the stator tube and wiring before I put the apron on or is it not
a problem to do this with the apron on, allowing me to tackle this
installment at a later time? My main concern is the front end of the box and
ease to work with this while the apron is one. TIA
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|