> When using a remote starter, the only safe way, it's
> important to pull out the coil wire to avoid actually
> starting the engine.
Depends on the engine. TR2-early TR6 lack the circuit that powers the coil
just because the starter is engaged, so they won't start unless the key is
on.
BTW, it's much better to pull off a low-tension wire. Pulling the high
tension wire can damage the coil, especially if you've upgraded the system
for higher voltage.
Randall
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|