[TR] front seal

["james mc arthur" <jrmcarthur@verizon.net>]

Happy Memorial Day to all! I have a quick question for anyone that may be 
sitting at the PC. I am reassembling the front end on the TR6 and cannot 
remember the orientation for the felt grease seal for the inner bearing in 
the front hub. Is it felt out/steel in or steel out/felt in. My logic would 
dictate felt in, but I have been wrong before. Thanks in advance!........Jim 
in York, Pa.......CF17672U 


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org