Thanks everyone who responded with instructions on recovering the pesky
doglegs on my TR3A. This is how it came out. I used a Marine PVC with
polyester
backing that I got at Jo-Anns Fabrics. It is quite stretchy to begin with,
it is made for marine upholstery applications, and the grain is VERY similar
to the original. I used a 3M Hi Strength 90 spray contact adhesive and it
stretched on beautifully with no heat application. I used a jig as was
demonstrated by one of the respondents. I was surprised how easy it was.
Thanks
again.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|