I have done it and it works just fine with emphasis being placed on "small".
Most regular screwdrivers will be too big. You will need to go to the micro
size or jewelers screwdriver, or use an awl.
Aaron
Aaron Cropley
71 TR6 (Throttle Body Injection!)
http://www.triumphowners.com/108
Topsham, Maine
-----Original Message-----
From: tr3driver@comcast.net
To: triumphs@autox.team.net
Sent: Thu, 19 Oct 2006 10:42 AM
Subject: RE: [TR] PDWA centering
> Late this afternoon, the Lord willin' and the creek don't rise, I'll
> fire up the Spitfire today after its long nap. Having installed and
> bled new brake lines, I won't be surprised to find that the PDWA is
> uncentered. I can imagine several ways to fix it, but I'm open to
> suggestions. Advice is welcome.
Not tried it myself yet, but removing the switch and using a small screwdriver
to position the piston sounds the sanest method to me. As I recall, the book
method is to bleed first one side and then the other until the light goes out.
Randall
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web, free
AOL Mail and more.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|