RE: [TR] Early TR4 - Timing Cover Oil Seal

["Randall" <tr3driver@comcast.net>]

> The old seal innards had aged and disintegrated when I took the
> cover off. I think I know which way round the replacement should
> go, but I am (obviously) not 100% sure. I have attached 2 pics (I
> hope). I would appreciate opinions on #1 or #2.

Unfortunately, you cannot send graphics (or indeed any attachment) through
the list.

Your new seal should have a closed side and an open side, the open side goes
towards the inside of the engine.

Randall


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org