Bill - you will still want the cotton batting. The actual diameter
needed to round out the capping is about 1 1/2" - maybe a bit under.
BTDT
Carl in Tampa
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net] On Behalf Of William Scherer
Sent: Friday, April 21, 2006 11:26 PM
To: Triumphs@autox.team.net
Subject: [TR] TR2 door capping pads from Moss arrived
Hi List
I received two door cap foam pads from Moss. They are 1 inch O.D, so
it
looks like there is no cotton batting needed to bring them up to proper
diameter.
Bill in MN
54 TR2
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|