Michael,
The bullet connectors are supposed to be offset so they aren't all bunched up
in the same spot as they go through the tube, but I also found that it was
still just too much. I ended up cutting one of the connectors off and putting
on another after I pulled it through.
Bob
-------------- Original message --------------
From: Runamok714@aol.com
> Does anyone have a magical method of feeding the wire harness for my horn,
> flasher switch through the steering shaft. My new one is a repo that came
>with
> the car. And in spite of my best efforts does not want to cooperate. I have
> tried pull wires and lubricants but it just seems to be to big.
> Thanks Michael 59 TR3
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|