Re: [TR] Light Problem

[Dave1massey@cs.com]

In a message dated 3/22/2006 4:28:04 PM Central Standard Time, 
anabil007@comcast.net writes: 
> Ah Ha  bad  wire ... break out the VOM ... resistance from 
> the disconnected light harness red/blue to the bulb  connector ...  0 
> ohms  +-1 ohm.

Oh, also make sure all the power is off when you make that ohm reading.  
Voltage could fake out your ohm meter.

Dave


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org