> Next, and this is the
> question, when I
> put the synchos on, I don't get the proper clearance value,
> .030,as per the
> manual. As a matter of fact, the second gear is down right
> tight to get on.
> The races that the synchos sit on each gear are in great shape.
> These are new
> syncho, supposely NOS. Should I work the synchos to get down to
> .030 or is
> a larger value OK.
I believe a larger value is fine. The .030" (or .025") is a wear limit.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|