RE: Tr4 Clutch taper pin

["Randall" <tr3driver@comcast.net>]

> While attempting to put a new clutch in my tr4 this weekend, I twisted
> off the taper pin in the throw out bearing fork. Are there any tricks to
> removing the fragment inside the fork or does one drill and use an easy
> out? It is very difficult to access because the fork won't rotate. Any
> help would be greatly appreciated.

Sounds to me like it may be time to take an angle grinder to the shaft, and
order a new one.  TRF's got them on sale for $20 for the next few days ...

Randall