Thanks to both of you. I always assumed that they bored the original MC bore
to fit a sleeve thus retaining the original bore size and accomodating the
standard rebuild kits.
Jay Welch
Abington, MA
TR6s
Member Cape Cod British Car Club CCBCC http://www.capecodbritishcarclub.org/
---
Thanks to Gerald M Van Vlack, I found that I was wrong about how
Apple Hydraulics remanufactures brake MCs for TR6s. They use
oversized pistons to fit the rebored cylinder and they do sell the
oversized seals. Thanks to all who offered help and especially to
Gerald.
Tim
|